|
Post by lewis132 on Sept 15, 2007 16:23:53 GMT -5
alldata show timing mark with E. at the top dead center,but the cam can be installed 2 ways with and I. being at the top. If the E is put on top with the crank at the top dead center there is no compression. Is this a mis print or does the I have to be at the top. 1.6 sohc 16 valve thanks lewis
|
|
mosse
New Member
Posts: 1
|
Post by mosse on Aug 22, 2011 11:36:31 GMT -5
wich mark on camshaft gear do i set intake or exhaust
|
|