|
Post by ben256 on Mar 17, 2009 16:09:26 GMT -5
I drive a 1995 4x4 sidekick. The manual locking hubs on it are stuck in lock, so i can use my 4 wheel drive, but i cant take the hubs off for the summer. How do i fix this?
|
|
|
Post by dohboysean on Mar 22, 2009 2:19:25 GMT -5
how stuck? sometimes if they havent been used in awhile your fingers arent strong enough to turn, try a pair of pliars gently, if that dont work, you most likely need to take your hubs apart and regrease, and if that dont work you might need new hubs good luck
|
|
|
Post by quietwind on Mar 22, 2009 3:52:52 GMT -5
At very least you need to remove the hubs; completely disassemble, clean up any burrs with a file, wash all the parts up and then grease and reassemble!
If it's a matter of the lock dial being stuck a dousing with penetrant on the face may help but complete service is inevidable. If you remove the hubs first make sure you just unboolt the complete hub before you remove the faceplate.
|
|